Filter
Top Products
60-EN
If a disc containing both a compressed video file and a compressed
audio file is used, you have a choose to play back only a video or only
audio.
Setting item: DVD Play Mode
Setting contents: Video / Audio
When playing a Playback Control (PBC) enabled Video CD, you can
choose to set PBC ON or OFF.
Setting item: PBC
Setting contents: OFF / ON
Source Setup Operation
1
Press SOURCE/ on the unit.
The SOURCE selection screen is displayed.
2
Touch [ ] on the main source screen.
The Setup Select screen is displayed.
3
Touch [ ] of Source Setup.
The Source Setup screen appears.
4
Touch [ ] of your desired Setup mode.
DVD Setup*
1
/Radio Setup/SiriusXM Setup*
2
/
BLUETOOTH Setup*
3
/Pandora Setup/USB Search*
4
*
1
Refer to “DVD Setup” on page 55.
*
2
Displayed only When an optional SiriusXM Tuner Receiver Box is
connected. For detailed setting, refer to
“SiriusXM Setup” on
page 68.
*
3
Refer to “BLUETOOTH Setup” on page 83.
*
4
The setting can be changed directly by touching [ ] or [ ].
5
Touch [ ], [ ] or [ ], etc. of the desired item to
change its setting.
Radio Setup:
Tuner Condition/Digital Seek
Pandora Setup:
Pandora/Pandora Volume
6
Touch [ ] to return to the previous screen.
Touch [Exit] to return to the main source screen that was
displayed before the setup operation was started.
Setting the compressed File Playback Data
Video:
Only Video data is played back.
Audio:
Only Audio data is played back.
Setting the Video CD Play Mode
OFF: The PBC menu is not displayed.
ON: The PBC menu is displayed.
SOURCE Setup
To display the Source Setup Menu screen:
Your vehicle must be parked with the ignition key in the ACC or
ON position. To do this, follow the procedures below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the Source mode operation has been
released. Engaging the parking brake can reactivate the Source
Setup Menu, as long as the car’s ignition has not been turned off.
It is not necessary to repeat the above procedure (1 through 3) of
“To display the Source mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the Source mode screen.”
The following steps 1 to 6 are common operations to each
“Setting item” of Source Setup. Refer to each section for details.