Filter
Top Products
67-EN
Setting item: AUX1 IN
Setting contents: OFF / ON
• OFF is not displayed when the optional DVD player or DVD changer
is connected. During System setup, although the AUX1 name can be
changed, it is not displayed on the source selection screen.
• When OFF is selected, the settings related to AUX1 cannot be
changed from this unit.
Adjusting the AUX1 name Mode
After setting to ON in “Setting the AUX1 Mode”, this setting can be
carried out.
Setting items: Primary / Secondary
*
1
Setting contents: OFF
*
2
/ AUX
*
3
/ DVD / Game / EXT.DVD / DVD
CHG / USB Video / DTV
*
1
When a USB Video box or TV Tuner (both are sold separately and
cannot be connected at the same time) is connected, you can use it to
connect one more External Input device. Setting the Secondary name
can change the source name display of this device.
*
2
The setting is only available for Secondary.
*
3
The setting is only available for Primary.
• The selected source name is displayed instead of AUX1 source name.
• You can set Secondary name only when Primary name is set to
DTV or USB Video. And you cannot set the same name as in Primary
name.
Adjusting the External Input Audio Level of AUX1
After setting to ON in “Setting the AUX1 Mode”, this setting can be
carried out.
Setting item: Level
Setting contents: Low / High
Switching the Visual Input Signal System of AUX1
After setting to ON in “Setting the AUX1 Mode”, the video input type
can be changed.
Setting item: Signal
Setting contents: NTSC/PAL / Auto
• When set to Auto, unstable display may occur while playing back
certain black and white video signal. In this case, select NTSC or
PAL mode manually.
Setting item: AUX2 IN
Setting contents: iPod Video / AUX
• When the current source is iPod video or AUX2, this setting cannot
be adjusted.
Adjusting the External Input Audio Level of AUX2
Further Setting item: Level
Setting contents: Low / High
• This setting item is adjustable only when AUX2 IN is set to AUX.
Switching the Visual Input Signal System of AUX2
Further Setting item: Signal
Setting contents: NTSC/PAL / Auto
• The video input type can be changed.
• When set to Auto, unstable display may occur while playing back
certain black and white video signal. In this case, select NTSC or
PAL mode manually.
• This setting item is adjustable only when AUX2 IN is set to AUX.
Outputs the picture of the source selected on the INA-W910 connected
to the rear monitor.
Setting item: AUX Out
Setting contents: OFF / ON
Setting item: BLUETOOTH IN
Setting contents: OFF / ON
• For details on BLUETOOTH operation, refer to “BLUETOOTH
Operation” (page 83).
• If mobile phone compatible with the Voice-Dial function is
connected, the Voice-Dial function can be used.
Setting the AUX1 Mode
OFF: AUX1 source is not displayed.
ON: AUX1 source is displayed.
Low: Decreases the external input audio level.
High: Increases the external input audio level.
NTSC/PAL: Choose the video input signal type manually.
Auto: The suitable video input signal type will be
automatically chosen between NTSC and PAL.
Setting the AUX2 Mode
iPod Video: Set when an iPhone or a video compatible iPod is
connected to the iPod (V)/AUX Input Connector.
AUX: Set when an optional AV/RCA interface cable
(4-pole mini AV plug to 3-RCA) is connected. A DVD
player etc. with RCA audio/video output can be
connected to this unit. In this case, the iPod video
will not be displayed.
Low: Decreases the external input audio level.
High: Increases the external input audio level.
Setting the Picture Output
OFF: The “Remote Sensor” and “Rear Source” items are
not displayed on the System Setup screen.
ON: The “Remote Sensor” and “Rear Source” items are
displayed on the System Setup screen.
Setting the BLUETOOTH Connection
(BLUETOOTH IN)
OFF: BLUETOOTH function is not used.
ON: Select when you would like to pair your Bluetooth
compatible phone with this unit.