Filter
Top Products
91-EN
Front camera Operation
1
Press SOURCE/ on the unit.
The SOURCE selection screen is displayed.
2
Touch (CAMERA).
The Camera mode is activated and view video is displayed.
3
Touch any area of the screen to display the view
change function keys.
4
Touch [Panorama], [Corner] or [Top] to choose
the view angle.
Touch [ ], the view change function keys will disappear.
• For more information, please refer to the owner’s manual of
connected front camera.
Rear camera Operation
1
Press SOURCE/ on the unit.
The SOURCE selection screen is displayed.
2
Touch (CAMERA).
The Camera mode is activated and view video is displayed.
3
Touch any area of the screen to display the view
change function keys.*
3
4
Touch [Back], [Panorama], [Corner] or [Top] to
choose the view angle.
5
Touch [Guide On] or [Guide Off] to set whether the
rear camera guide line*
4
is displayed.
Touch [ ], the view change function keys will disappear.
1
Shift the gear lever to the reverse (R) position.
The rear view image is displayed while the car remains in
reverse.
2
Touch any area of the screen to display the view
change function keys.*
3
3
Touch [Back], [Panorama], [Corner] or [Top] to
choose the view angle.
4
Touch [Guide On] or [Guide Off] to set whether the
rear camera guide line*
4
is displayed.
Touch [ ], the view change function keys will disappear.
*
3
Displays only when the rear camera with view change function is
connected and View Change Func. is set to ON (
page 66).
*
4
Displays only on the Back view screen of rear camera.
• Be sure to also check behind the car visually. Use the camera image
to assist in showing conditions behind the car.
• This function is effective when the reverse wire is properly connected.
• For more information, please refer to the owner’s manual of
connected rear camera.
This operation can be performed only when the gear lever is in the
reverse position (R).
Make sure view change function is set to ON (page 66).
1
Touch any area of the screen to display the view
change function keys.
2
Touch [Back] for three times.
The volume adjustment screen appears.
3
Touch [Panorama] to switch a desired Volume
Level.
Touching the button toggles the volume level.
4
Touch [ ] to return to normal mode.
Display the front view video manually
[Panorama]: Panorama View
[Corner]: Corner View
[Top]: Ground View
Display the rear view video manually
[Back]: Rear View
[Panorama]: Panorama View
[Corner]: Corner View
[Top]: Ground View
Display the rear view video while the car is
in reverse
[Back]: Rear View
[Panorama]: Panorama View
[Corner]: Corner View
[Top]: Ground View
Adjusting Alarm Volume (HCE-C300R only)
Display example for volume adjustment screen