Filter
Top Products
57-EN
These acoustical problems are so severe that no correction system has
been able to overcome them. Until now, with the introduction of
IMPRINT, Alpine provides a hardware/software combination that not
only solves these problems, it actually improves the sound stage, tonal
balance and definition - and does it automatically, in a matter of
minutes!
IMPRINT using MultEQ is superior to other equalization systems in
five ways.
• It is the only system that measures the entire listening area,
capturing time domain information from each listening
location and applying a proprietary method for processing it
to represent all seat locations. This gives the people in each
seat the optimal listening experience.
• It corrects both time and frequency problems, for an
improved soundstage and smoother, more natural sound.
• It uses dynamic frequency allocation to apply hundreds of
points of correction to those areas where the sound problems
are greatest.
• It determines optimized blending points for low frequency
crossovers.
• It provides, in minutes, vehicle sound tuning that generally
takes skilled professionals days to accomplish.
Switching the Navigation Screen
(Optional)
If an optional Alpine Navigation System is connected to the IVA-W505,
the Navigation screen can be displayed on this unit.
1
Touch [SOURCE] on the main source screen.
The source screen appears on the display.
2
Touch [NAV.].
The Navigation screen is displayed.
The operation is possible with the supplied navigation
remote control.
For navigation operation, refer to the Owner’s Manual of the
navigator.
• The Navigation mode is selected in “Setting the VISUAL Soft
Button” (page 39). The navigation mode is activated through the
VISUAL Button without interrupting normal audio.
• If the Navigation mode menu is not displayed on the main menu
screen, select ON in “Setting the Navigation Mode” (page 38).
• When the Navigation System is on and in guidance mode, the voice
prompts and navigation map interrupts the current audio source.
• For operation, if a navigation system with touch panel operation is
connected, refer to the Owner’s Manual of the navigation system.
Portable Navigation System Operation
(Optional)
An optional Alpine Portable Navigation System is controllable from the
unit. For details on operation, refer to the Owner’s Manual of the
Portable Navigation.
About dockable BLACKBIRD series or Portable Navigation devices
with this unit.
• Docking to the PMD-B100 is not possible.
• For information on docking a portable navigation to the unit, consult
your Alpine dealer.
1
Press OPEN on the unit.
The unit changes to the EJECT/TILT screen.
2
Touch [OPEN].
The movable monitor will open.
INTRODUCING IMPRINT
HOW IMPRINT IS DIFFERENT
Navigation System
(Optional)
A BOX type navigation system and portable navigation cannot
be connected at the same time.
If the Built-in Dock is used: