Filter
Top Products
62-EN
Checking the SAT Radio ID Number
A unique Radio ID number is required to subscribe to SAT Radio
programming. Each third party XM or SIRIUS radio comes with this
number.
XM Radio:
This number is an 8 character alphanumeric number. It is printed on a
label found on the SAT Receiver.
SIRIUS Radio:
This number is a 12 digits number. It is printed on a label found on the
SAT Receiver.
It can also be displayed on the screen of the IVA-W505 in the following
way.
1
While receiving SAT Radio, touch NO. [ ] or [ ] to
select channel ‘0’ for XM and channel “255” for
SIRIUS.
The unit displays the ID number.
2
To cancel the ID number display, change the
channel.
• You cannot use “O”, “S”, “ I” or “F” for the ID Number. (XM radio
Receiver only)
• You can check the ID number printed on a label on your third party,
SAT Radio Receiver package.
Storing Channel Presets
1
Touch [P1/3] after selecting a desired band.
The Function Guide is switched.
2
Touch and hold any one of the preset buttons
[P.SET 1] through [P.SET 6] for at least 2 seconds.
The selected channel is stored.
3
Repeat the procedure to store up to 5 other channels
onto the same band.
To use this procedure for other bands, simply select the
desired band and repeat the procedure.
A total of 18 channels can be stored in the preset memory
(6 channels for each band; XM1, XM2 and XM3 or
SIRIUS-1, SIRIUS-2 and SIRIUS-3 ).
• If you store a channel in a preset already being used, the current
channel will be replaced with the new one.
Receiving Stored Channels
1
Touch [P1/3] after selecting a desired band.
The Function Guide is switched.
2
Touch any one of the preset buttons [P.SET 1]
through [P.SET 6] that has your desired satellite
channel in memory.
Search Function (XM mode)
1
In XM mode, touch [ ].
The category search list is displayed.
Screen example for category search list
The list scrolls one line at a time by touching [ ] or [ ].
Touch [ ] to receive the selected category channel
directly.
[ ] is displayed if there is a hierarchical list.
Touch [ ] to change the channel name search screen of
the selected category.
Category UP/DOWN can directly be performed.
Scroll the list one page at a time by touching [ ] or [ ].
Screen example for channel name search list
The list scrolls one line at a time by touching [ ] or [ ].
The selected channel is received.
Returns to the category search list.
Changes the category
Scroll the list one page at a time by touching [ ] or [ ].
2
Touch [ ] of the selected Category or Channel
name.
The channel in the selected category is tuned.