Filter
Top Products
ALPHA™ Wireless Data Receiver Installation Manual
12
ALPHA 7000 Series Data Receiver Setup
Note: If you’re using an ALPHA 215 sign, go to page 2.
If you’re using an ALPHA Big Dot® sign, go to page 5.
If you’re using an ALPHA 4000 Series sign, go to page 8.
If you’re using an ALPHA 300 Series sign, go to page 16.
Step 1: Unplug the ALPHA sign from its outlet or power source.
Step 2: Remove the Access Cover located on the side of the unit, by unscrewing the two
screws that hold it in place:
Figure 16: ALPHA 7000 Series sign (front & back).
ALPHA
7000 Series
Access Cover
Communication Ports
Power supply