Filter
Top Products
ALPHA™ Wireless Data Receiver Installation Manual
7
ALPHA Big Dot® Data Receiver Setup (continued)
Step 6: Insert the Data Receiver cable plug into the
left
Receiver Cable port on the back of
the sign. Then place the cable in the Cable Groove:
Figure 9: Completed installation.
Step 7:
For Ceiling Hanging, Countertop, and Wall Mounting Brackets:
Install the Data Receiver (with its Access Cover Mount attached) over the
compartment opening on the back of the sign. Remount the sign and restore
power.
Step 8: After power has been restored to the sign, the indicator light on the front of the
Data Receiver should be on.
Step 9: This completes the Data Receiver installation.