Filter
Top Products
ALPHA™ Wireless Data Receiver Installation Manual
1
Installation Instructions
What’s included in the Data Receiver Kit?
1 Data Receiver
1 Jumper (In clear bag)
1 Access Cover Mount (Only used for ALPHA 215 and Big Dot signs)
2 Access Cover Mount screws (in bag)
2 Velcro strips (Optional. For flush wall mount where applicable. Not pictured below.)
1 3-foot Extender Cable (Optional use. Not pictured below. Used to connect the Data
Receiver to an ALPHA 4000 Series or 7000 Series sign when wall mounting either of
these signs.)
1 Modular Plug (Optional use. Not pictured below. Used to connect the 3-foot Extender
Cable to the cable on the Data Receiver.)
Figure 1: Data Receiver Kit (photos not to scale).
If you are missing any of the above items, contact your ALPHA distributor.
For ALPHA 215 installation, go to page 2.
For ALPHA Big Dot® installation, go to page 5.
For ALPHA 4000 Series installation, go to page 8.
For ALPHA 7000 Series installation, go to page 12.
For ALPHA 300 Series installation, go to page 16.
Jumper
Data Receiver (front)
Data Receiver (back) —
shown with Access Cover
Mount attached.