Filter
Top Products
If a problem should develop while operating the CD changer, the following error codes may appear on the display panel.
ER-1: Indicates that there is no magazine loaded in the CD changer.
ER-2: Indicates a problem with the magazine eject function.
ER-3: Indicates an error in the disc loading function.
ER-4: Indicates an error in the disc un-loading function.
ER-5: Indicates an error in the magazine position.
ER-6: Indicates an error in the laser pick-up position.
ER-7: Indicates an error in the laser focus on the disc.
In any of these error situations, try ejecting the CD magazine from the changer and make sure the discs are clean, undamaged,
and loaded correctly(refer to the Owner’s Manual of the CD changer). Re-load the magazine and check for proper operation. You
may also try activating the RESET button dm on the unit, but this will also erase the time and pre-set memories.
If the suggested measures do not solve the problem, contact an approved warranty station near you for further assistance.
CD CHANGER ERROR CODES
RPT button again or by activating the Scan du or Random Play
em functions.
When the Repeat button is pressed twice the DISC and RPT
indications will appear on the display panel and play of the selected
disc will be continually repeated until the Disc Repeat mode is
canceled by pressing the RPT button again or by activating the
Scan du or Random Play em functions.
em DISC/TRACK RANDOM PLAY (RND)
When the RND button is pressed, the RND indication will appear
on the display panel and the tracks on the disc will be played in a
random, shuffled order. The Track Select button ds will also select
tracks in the shuffled order instead of the normal progression.
The Random Track mode can be canceled by pressing the RND
button again or by activating the Scan du or Repeat Play el
functions. When the RND button is pressed twice, the DISC
and RND indications will appear on the display panel and the
discs in the magazine will be played in a random, shuffled order,
as well as the tracks on each disc. After playing a track selected
at random from a disc in the magazine, the unit will select another
disc at random and play a randomly selected track on it. This will
continue until the Random Disc mode is canceled by pressing
the RND button again or by activating the Scan du or Repeat
Play el functions.
-12-