Filter
Top Products
1. Make sure the front panel is oriented correctly when sliding it into the front mounting plate, as it cannot be attached when up-
side down. Use moderate pressure to fully seat the panel into position.
2. To verify correct panel installation, swing the panel assembly up into position until it locks easily into place. If any resis-
tance is encountered, re-check panel orientation in chassis mounting plate.
3. When taking the front panel with you, please use the supplied carrying case to protect the panel from dirt and damage. Make
sure there is no dust or dirt on the electrical terminals on the back of the panel as this could cause intermittent operation
or other malfunctions.
-9-
NOTES ON USE OF FRONT PANEL
CD EJECT
BUTTON
(27)
CD SLOT (19)
FRONT PANEL
MOUNTING
PLATE GUIDE
(2 PLACES)
PANEL MOUNTING
PLATE
THEFT-DETERRENT
LED (30)
RESET BUTTON (31)