Filter
Top Products
OPERATING INSTRUCTIONS
-3-
1 ON-OFF POWER BUTTON ( )
Press this button to turn the unit on or off. If the ignition switch is
“on”, the unit will also turn on automatically when a compact disc is
inserted, or if the BAND switch or Mode switch (MOD) is
pressed.
2 AUDIO (LEVEL) CONTROL
To increase the volume level, turn the knob clockwise (UP). The
volume will increase and the level will be shown on the display
panel from a minimum of 00 to a maximum of VOL 39. To
decrease the volume level, turn the knob counter-clockwise (DN).
The display will automatically return to the normal indication 5
seconds after the last volume adjustment or when another function
is activated. This control is also used in conjunction with the Push
Select Control button 3 to adjust the bass, treble, balance and
fader levels as described in 4, 5, 6 and 7.
3 PUSH SELECT CONTROL BUTTON
This button, which is integral to the AUDIO CONTROL, is used to
select the audio function (volume, bass, treble, balance, or fade)
whose setting is adjusted using the AUDIO CONTROL 2.
Pressing the PUSH SELECT control button once will set the unit
for bass adjustment (BAS will appear on the display panel) and
an audible beep will occur. Pressing the button additional times
will select treble adjustment (TRE on the display), balance (BAL),
or fader (FAD), each accompanied by a beep tone. The display
will automatically return to the normal indication 5 seconds after
the last adjustment or when another function is activated.
4 BASS CONTROL
To adjust the bass level, first select the Bass mode by pressing
the Select button 3 so the BAS indication appears on the display
panel.