Filter
Top Products
-5-
panel according to your selection. During disc play, pressing this
button will stop play of the disc and switch to radio operation
without ejecting the disc. During this time, the IN indication
will remain on the display panel to show that a disc is still loaded
in the unit. Press the MOD button to return to disc play from the
beginning of the last track in play.
When AM1 or AM2 is selected, the stereo (ST ) indication will
disappear from the display.
bm MANUAL UP/DOWN TUNING ( + / -) /
AUTOMATIC SEEK TUNING (SEEK)
To manually select a radio station, momematrily press the Up
Tuning (+ ) side of the button to advance the unit two digits
higher or the Down Tuning ( -) side of the button to tune two
digits lower.
Pressing either side of the button for longer than 0.5 seconds
and then releasing will activate the Automatic Seek Tuning function.
The radio will seek the next station in the selected direction and
stop at that frequency. The Seek function can be stopped by
pressing the button again or activating any other tuning function.
Pressing and holding either side of the button for longer than 0.5
seconds will cause the radio to continue tuning rapidly in the
selected direction until the next available station and stop there.
bn LOCAL/DISTANT SELECTOR (LOC)
This feature is used to select the strength of the signals at which
the radio will stop during Automatic Seek Tuning. Pressing the
button will select the Local setting (LOC will appear on the display
panel) and only strong (local) stations will be received. Pressing
the button again will select the Distant setting (LOC will disappear
from the display panel) and the radio will stop at a wider range of
signals, including weaker (more distant) stations.
bo SUB-WOOFER SELECTION (SUB.W.)
The radio is equipped with a monaural audio output (in addition
to the low-level stereo outputs) which can be connected to
a remote power amplifier and associated sub-woofer speaker.
When the SUB.W. button is pressed, the indication appears
on the display and the sub-woofer audio signal is activated
and applied to the remote power amplifier, thereby enabling
the sub-woofer output.
bp PRE-SET SCAN (PS) / AUTO-STORE TUNING (AS)
Press this button momentarily to scan the stations pre-set into
each AM band and each FM band. The unit will stop at each
pre-set station for 5 seconds before continuing to the next pre-set
station (the pre-set number on the display panel will flash during
Pre-Set Scan operation). Press the button again momentarily to
stop Pre-Set Scan operation and remain on the selected
frequency. If no buttons are pressed during the scan, the unit will
return to the original station before the scan.
Pressing and holding the button for longer than 2 seconds will
activate the Auto-Store Tuning feature which will automatically
scan and enter up to 6 stations into the pre-set memories on the
band in use. If you have already set the pre-set memories to your
favorite stations, activating the Auto-Store Tuning feature will erase
those stations and enter the new ones. This feature is most
useful when travelling in a new area where you are not familiar
with the local stations.
bq STATION PRE-SET MEMORIES
To set any of the 6 pre-set memories in each band, use the
following procedure:
1. Turn the radio on and select the desired band.
2. Select the first station to be pre-set using the Manual Up/
Down or Automatic Seek Tuning Controls bm.