Filter
Top Products
PREPARATIONS BEFORE OPERATION
– 9 –
Connect to a Mobile Amplifier Turn off all the equipment before connections.
Connect to a TravelPilot DX-N Navigation System Turn off all the equipment before connections.
In the connection diagram, the system’s power leads should be connected at the same point to minimize noise.
REMOTE IN
VIDEO OUT
RL
AUDIO OUT
DC
12V 1.5A
Video In
Audio In
Monitor
Mobile Amplifier
Filter
Fuse
External
Remote
Sensor
12V
+
–
■
This schematic describes the installation of an After
Market video source, such as VCR, DVD, TV Tuner, or
Video Game, connected to a Blaupunkt DX-N
Navigation System through a Blaupunkt Video
Converter, P/N 7 607 005 718. The Video Converter is
necessary to convert the source’s video signal into a
usable format for the DX-N.
■
Signal connections include: (a) RCA connection from
the video source’s output to the converter’s input, (b) 15
pin serial connection between the converter' s output
and the DX-N ROM 15 pin input, and (c) DX-N ROM
connection to the DX-N screen, using the supplied
video cable.
■
Note: When using a gooseneck mounting adapter, P/N
7 612 001 204, the supplied cable will take the place of
the DX-N monitor cable supplied with the DX-N
package.
■
Note: Video source audio connection can be made via
RF modulator to any factory radio or via RCA cable
through an After Market radio if an auxiliary input is
available.
Video Line Output
DX-N Screen
DVD-ME1
34
56
12
Pin 1:12vdc Constant
Pin 2:Ground
Pin 3:Reverse Trigger
Pin 4:12vdc Output
Pin 5:12vdc Ignition
Pin 6:Video Trigger (Plus=FBAS)
Video In
Video Converter
7 607 005 718
Input Output
RCA Cable
DX-N Main Unit (Rear View)
15 Pin Serial Cable
(supplied with converter)
DX-N Monitor Cable
(supplied with DX-N)