Filter
Top Products
FUNCTION SETTING
– 16 –
3. Exit from menus.
■
Press direction buttons and
(PLAY) to select the relevant exit
column.
■
Press the direction buttons , to
exit from “DUAL MONO”.
■
Press the direction button to select
“MAIN PAGE”, press (PLAY) to
exit from the current column and
return to the main menu.
The screen shows:
■
Press , to select “EXIT SETUP” ,
then press (PLAY) to exit from the
menu setting.
GENERAL SETUP
The setting structure is as follows:
GENERAL SETUP PAGE
TV DISPLAY >> 4:3/PS
4:3/LB
16:9 WIDE
TV TYPE >> PAL
AUTO
NTSC (US)
ANGLE MARK >> ON
OFF
CAPTIONS >> ON
OFF
SCREEN SAVER >> ON
OFF
MAIN PAGE
SETUP MENU -- MAIN PAGE
GENERAL SETUP
DOLBY DIGITAL SETUP
PASSWORD SETUP
PREFERENCES
EXIT SETUP
TV Display
1. 4:3/PS
This is selected when the unit is
connected to a normal TV. Wide-screen
images are shown on the screen, but
with some parts cut automatically.
TV Type
You may select according to the color
system of the TV/monitor to be
connected.
■
Select “AUTO” for a multi-system
TV/monitor.
■
Select “NTSC” for ra NTSC
TV/monitor. (US)
■
Select ”PAL” for a PAL TV/monitor.
Screen Saver
Start the screen saver, the screen
saver image appears when the unit
stops or the image is frozen for a few
minutes. This saver can keep the
screen from being damaged.
■
ON: Start the screen saver.
■
OFF: Remove the screen saver.
Angle Mark
This only works when there is an angle
mark on the disc.
■
Select “ON” , the screen shows the
mark when playing DVD.
■
Select “OFF” , the mark is not
shown.
Compression
■
LINE OUT: Compress input signals
linearly.
Dual Mono
This is the output mode of the L and R
signals of the set audio output. If it is
set to “MIXED MONO”, the function
only works when the DVD being played
is 5.1 channel.
Dynamic Range
When the compression mode is set to
“LINE OUT”, this is selected to adjust linear
compression rate to obtain the different
compression results of the signals.
Front Speaker
■
STEREO Lt/Rt
Select this when you play a disc with
dolby Pro Logic stereo, the disc signals
can be decoded by the unit and be
reproduced the realistic theater effects
in your room.
■
STEREO
Select this, the audio output is
produced as an ordinary stereo
signals.
Captions
■
ON
The hidden subtitle is shown.
■
OFF
The hidden subtitle is turned off.
2. 4:3/LB
This is selected when the unit is
connected to a normal TV. Wide-screen
images are shown on the screen, with
black belt on the top and bottom.
3. 16:9 WIDE
This is selected when the unit is
connected to a wide-screen TV.
The screen shows:
DOLBY DIGITAL SETUP
The setting structure is:
--DOLBY DIGITAL SETUP PAGE--
COMPRESSION >> LINE OUT
DUAL MONO >> STEREO
LEFT MONO
RIGHT MONO
MIXED MONO
DYNAMIC RNG
FRONT SPEAKER >> STEREO Lt/Rt
MAIN PAGE