MP3 OPERATIONS
– 18 –
Play Discs
MP3 is an audio compression mode
which adopts the Layer 3 in
international standard MPEG. It
compresses audio signals with a ratio
of 12:1. With MP3, a disc may record
over 600 minutes of music or 170
songs, but the sound quality ia as
good as a CD.
Note: 128 kbps or higher only.
SELECT TRACKS WITH MENUS
1. Load a disc, the screen shows the
home menu after the unit finishes the
search.
Repeat Play
You may use repeat function to enjoy
some track.
Other Functions
When playing an MP3 disc, the unit has
functions like mute, volume control,
pause, previous/ next track, and
channel selection. You may operate as
you do with a CD.
NOTE on MP3: For high quality sound,
we recommend converting MP3 files
with sampling frequency of 44.1KHz
and a fixed bit rate of 128kpbs. Note
that the unit may not play tracks in the
order that you record them to the disc.
1. Select tracks to play.
2. Press REPEAT until the screen
shows “REPEAT ONE”.
The screen shows:
Press (PLAY) to enter the sub-
menu.
3. Press or to select tracks
according to the sub-menu.
Example: Select track 2 on CD3. (The
80th song on the disc.)
The screen shows:
The unit will play the tracks you
selected a few seconds later.
4. Press RETURN to return to the
home menu.
If the menu is shown on different
pages, the screen shows or
to instruct you to look at the next or
previous page.
2. Select the content of the home
menu.
Press or to select (if you select
CD3), the screen shows:
TOTAL 170
MP3 DISC
CONTINUE
MENU1
CD1 CD2
CD3 CD4
REPEAT ONE
TOTAL 170
MP3 DISC
CONTINUE
MENU1
CD1 CD2
CD3 CD4
TRACK 80 00:15
MENU2 CD3
01 02
03 04
05 06
07 08
Repeat
3. Remove repeat function.
The screen shows:
Repeat
REPEAT OFF