Filter
Top Products
BASIC OPERATIONS
– 11 –
TV/Video Selection
Press POWER on the TV and audio system.
1. Press “TV/VIDEO” on
the TV/monitor, select
VIDEO mode.
Play Discs
1. Press POWER to
turn on the unit.
According to the
system of the
TV/monitor, set the
system of the unit
to make it match
the TV/monitor.
WHEN PLAYING
PICTURES
If the pictures of DVD are
played, press to
make playback pause.
The unit enters step play
status. Each time you
press , the picture
advances one frame.
WHEN PLAYING MUSIC CD
Press to make playback
pause.
Press (PLAY) to resume
playback.
1. If the system of the
TV/monitor is PAL:
Press SYSTEM ,
select PAL.
The screen shows:
2. Press to
open the disc tray
and load a disc
with the label side
up.
2. Select the correct audio input for your system.
■
Each amplifier is different from another, please refer to the
manual of the amplifier. (e.g., connect the audio output of
the DVD player to the DVD audio input of an amplifier.)
Note: this step can be cancelled if you are utilizing the
auxiliary input of a Blaupunkt receiver.
TV/Video
DVD/LD
DVD CD
Pause
DVD CD
System Settings
DVD
Front Panel
3. Press again to
close the disc tray. The
unit begins to read the
disc.
5. Stop playback.
Press
Front Panel
Open/Close
4. Press (PLAY) to
play the disc.
6. Remove the disc and
turn off the power. You
have to push this button
twice to stop playback of
a DVD disc.
AFTER STEP 4 IS FINISHED:
■
PLAY DVD
The TV screen shows DVD menu or title
menu.
■
PLAY CD
Press (PLAY), the unit plays the disc
according to the track numbers.
PAL
STEP
NTSC
2. If the system of the
TV/monitor is NTSC:
Press SYSTEM ,
select NTSC.
The screen shows:
System
Pause