Blaupunkt RD 148 Car Stereo System User Manual


 
47
ENGLISH DEUTSCHFRANÇAISITALIANO
NEDERLANDS
SVENSKAESPAÑOL
PORTUGUÊS
Fast advance, audible (CUE).
Hold down >> as long as required.
Fast reverse, audible (REVIEW).
Hold down << as long as required.
If you press the rocker switch repeatedly,
you will skip over the corresponding number
of tracks.
The number displayed beside “T” (for track)
indicates the number of the track which is
currently playing.
Repeat track
You can repeat a track (endless). In CD
mode,
press 2/RPT.
“REPEAT” appears briefly.
The track will repeat until 2/RPT is pressed
once again.
MIX playback
CD tracks can be played back in random
order if desired. The MIX function has been
activated, when “MIX CD” appears briefly in
the display each time the audio source is
switched to CD and following each track.
Switching the MIX function on or off,
press 3/MIX briefly.
CD operation
This car stereo is equipped with a CD drive.
Note:
Use only standard circular CDs measuring
12 cm in diameter!
CDs measuring 8 cm in diameter or CDs in
different shapes such as a butterfly or beer
mug are not suitable for playback using this
equipment.
This is very likely to result in the destruction
of the CD or the CD drive.
We assume no liability for damage to the
equipment caused by playing unsuitable
CDs.
Switching to CD operation
Make sure that a disc is inserted, “CD” will
appear on the display panel.
Press SRC to go through the available
audio sources:
Press as many times as required until
the CD functions appear in the display
(track number, name/playback time).
Inserting a CD
Switch on the radio.
Insert a CD with the label facing up.
Never use force.
The CD will be transported to its playing
position automatically. CD playback will
start.
Removing a CD
Press the SRC button for approxi-
mately one second.
The CD will be ejected.
To protect the CD mechanism, do not im-
pair or try to help the automatic insertion and
ejection of the disc in any way.
If the CD is not removed from the drive within
approximately 30 seconds, it will be reinsert-
ed automatically.
Selecting a track
After a CD has been inserted, the activated
CD functions will appear on the display pan-
el.
/ Track selection Up
Down
Press once to go back to the begin-
ning of the current track.