Filter
Top Products
32
“SCAN” will alternate with the abbrevi-
ated name of the scanned station in
the display.
The unit will scan all of the stations
stored on the preset buttons in the cur-
rent reception range.
To stop Scan / Preset Scan:
Press SC or the search rocker switch
once again.
PTY Scan
PTY Scan cannot be started unless
PTY is switched on (“PTY” lights up in
the display).
All of the stations for the programme
type selected will be scanned briefly.
CD operation
CD Scan
Press SC briefly -
“CD-SCAN” will appear in the display.
The unit will scan all CD titles.
To stop CD Scan:
Press SC once again.
5 LD - Loudness
When the car stereo is playing quietly,
the Loudness function creates a more
natural sound by boosting the low fre-
quency range.
To switch Loudness on/off:
Press LD briefly.
Additional function: CLOCK
If you select the clock function the cur-
rent time will appear permanently in
the display.
To switch the display mode: Press LD
for approximately 2 seconds.
The time will disappear from the dis-
play for approximately 8 seconds when
you select a different function.
6 Rocker switch
Radio operation
/ Station search
Up
Down
<</>> Up/Down in short intervals (for FM
only when AF is off)
For FM only:
<</>> To scroll through the station net-
works when AF is on,
NDR 1, 2, 3, 4, N-JOY, FFN,
ANTENNE ... .
CD operation
/ Track selection Up
Down
Press once to go back to the be-
ginning
of the current track.
Fast advance, audible (CUE).
Hold down >> as long as required.
Fast reverse, audible (REVIEW).
Hold down << as long as required.
Extra rocker switch functions:
Further setting functions with
AUD A
DSC MODE @
PTY ?
Requirement: The corresponding func-
tion must be activated.