Filter
Top Products
54
LEARN KC To “train” a second Key-
Card.
Please read the information
in the section on “KeyCard
theft protection system -
“Training” a second Key-
Card”.
SHARX Switches the bandwidth in
the FM frequency range.
When there is a large
number of stations within
your current reception
range, use << >> to switch
to SHARX ON which will
prevent most interference
from adjacent radio stations.
This function has been set
to “SHARX ON” at the facto-
ry.
LED ON Here you can choose be-
tween LED ON or LED OFF.
With LED ON, the KeyCard
tongue will flash for extra
anti-theft protection when
the unit has been switched
off and the KeyCard re-
moved.
COLOUR Gradually matches the radio
illumination to the dash-
board lighting.
(green/orange)
BEEP Acknowledgement tone for
all functions which require a
button to be pressed for
more than one second.
The volume can be adjusted
from between 0 to 9.
(0 = off).
LO-DX To adjust the seek tuning
sensitivity.
“LO” stands for local recep-
tion.
“DX” stands for distant re-
ception.
Select “LO 3” if you want to
receive strong stations in
the local area, select “DX 1”
if you want to tune into
weaker stations which are
further away.
TA VOL To adjust the traffic an-
nouncement and warning
beep volume from between
0 to 66.
The message will then come
through at this volume, if the
standard volume is lower.
If the standard volume is set
higher than the TA VOL lev-
el, then the traffic report will
be played at the standard
volume.
SCANTIME Use this function to set the
scan time for the radio or
CD player from 5 to 30 sec-
onds.
STEREO/MONO
Switch modes by pressing
<< >>.
The mode selected will ap-
pear briefly in the display.
The radio will begin with
STEREO playback each
time it is switched on.