Blaupunkt RD 148 Car Stereo System User Manual


 
34
The mode activated will appear briefly
in the display: “MIX CD” or “MIX OFF”.
= SRC
SRC (Source)
When a CD is inserted you can switch
between the different audio sources
radio and CD.
(Eject)
Hold down the button for approximate-
ly 2 seconds and the CD will eject.
> CD slot
When you insert a disc into the slot
with the label side facing up, it will be
pulled in automatically and transported
to the playback position. CD playback
switches on automatically.
? PTY (Programme Type)
In the PTY mode, the preset buttons
become programme type buttons. With
each preset you can select one pro-
gramme type such as NEWS, SPORT,
POP MUSIC, EDUCATE, etc. With the
<< >> rocker switch, it is possible to
recall all of the PTY programme types
as long as the PTY function has been
activated (“PTY” will light up in the dis-
play).
To recall a station - Select the de-
sired waveband. On FM, adjust the
corresponding memory bank and press
the relevant preset button briefly.
Extra function for preset buttons
To store and recall a PTY programme
type.
On FM, you can store and recall one
programme type on/from each preset
button when PTY is active (“PTY”
lights up in the display).
CD operation
1/II - Pause
Switching Pause on/off: Press 1/II.
“CD PAUSE” will appear briefly in the
display.
2/RPT - Repeat
Repeat track: Press 2/RPT, “REPEAT”
will appear briefly in the display and
the track will repeat until 2/RPT is
pressed again. “RPT OFF” will then
appear in the display.
3/MIX -
MIX plays the CD tracks in random or-
der.
Switching MIX on/off:
Press 3/MIX briefly.
Regional function on/off:
Press the AF button for approximately
2 seconds until you hear a beep. “REG
ON” or “REG OFF” will appear in the
display (see the section on REG - re-
gional programme).
; TA (Traffic Announcement)
When “T” lights up in the display, the
radio is currently playing a traffic infor-
mation station.
When “A” appears in the display, the
priority for traffic stations has been ac-
tivated.
You can only tune into those stations
which broadcast traffic announce-
ments.
Priority on/off: Press TA.
< 1, 2, 3, 4, 5, 6 - preset buttons
Radio operation
On FM, you can store six stations for
each of the memory banks I, II and “T”.
On MW/LW, you can store six stations
each for each waveband.
To store a station - Press a preset
button during radio operation and hold
it down until the set resumes play after
the muting and you hear a beep.