Filter
Top Products
78
If necessary, refer to “How to enter a
name/text “.
• Press DSC/OK.
• Enter the PIN code and press DSC/
OK.
After “CODE OK”, the display shows
e.g. “SIM-CARD 23 ACCEPTED” (i.e.
this is the 23rd SIM card you have
trained).
The Radiophone can now be operated
using the new cards.
If you attempt to program a third Key-
Card, the KeyCard which was not part
of the programming process will auto-
matically become invalid.
If 30 SIM cards have been pro-
grammed, it will be necessary to delete
old access authorisations before new
cards can be trained.
b) Train new cards after removing the
KeyCard or Master SIM card
If this function has been activated in
the DSC learn mode, it will be possible
to train additional SIM cards each time
the KeyCard or Master SIM card is re-
moved. This function is practical if you
want to train several cards one after
the other (fleet management).
c) Delete SIM card authorisations
The authorisation for SIM cards can be
deleted using the CARD LIST in the
DSC menu. The Master SIM card can
be deleted with a KeyCard only.
DSC learn mode
With this function you can select whether
you want to train additional SIM cards using
the DSC menu only or each time after re-
moving the KeyCard or the Master SIM card
as well.
For operating instructions refer to ”Program-
ming with DSC – LEARN MODE”.
Displaying the radio pass data
Using the KeyCard supplied with your set
you can have the radio pass data such as
the model name, product number (7 6..) and
serial number indicated in the display.
Please refer to the section on “ Program-
ming with DSC – READ KEYCARD”.
Optical warning of anti-theft
protection
Flashing KeyCard tongue
When the vehicle has been parked and the
KeyCard or SIM card removed, the KeyCard
tongue can be switched to flash to provide
additional anti-theft protection.
For this function to operate properly it is nec-
essary for the positive power supply line and
the permanent +12 V lead to be connected
as described in the installation instructions.
Be sure that “KEYCARD LED ON” has been
activated in the DSC mode.
If necessary, refer to the section on “Pro-
gramming with DSC – KEYCARD LED”.
Switch off the flashing light
The flashing light can be switched off by
pushing in the KeyCard tongue gently until
it locks.
If you would like to deactivate the flashing
tongue altogether, select the “KEYCARD
LED OFF” item in the DSC menu:
KeyCard and SIM card
Helsinki gb1 12.06.2002, 10:47 Uhr78