Filter
Top Products
87
DEUTSCH
Radio
Telefon
ENGLSH
Radio
Telephone
briefly in the display if you are using the
same memory bank.
Automatically store the stations
with the strongest reception
using Travelstore
You can automatically store the nine most
powerful FM stations in your current recep-
tion area in the “FMT” memory bank, sorted
according to their signal strength. This func-
tion is particularly convenient during longer
trips. This will have no effect on the radio
stations stored in the FM, MW or LW mem-
ory banks.
• Press BND/TS for 2 seconds.
“TRAVELSTORE” will flash in the display.
The nine strongest FM stations will be auto-
matically stored on the “FMT” (Travelstore)
memory bank.
When this process has been completed, the
radio will play the station stored on preset
button 1, which is the station with the strong-
est reception.
If desired, stations can also be stored man-
ually on the Travelstore memory bank (re-
fer to “Store radio stations”).
Recall stored radio stations
a) You can recall any stored radio station
at the touch of a button.
• Press BND/TS repeatedly until the
desired waveband appears in the
display.
• Press the corresponding preset but-
ton briefly to recall the station.
If you wish to recall a station stored on
a two-digit preset (e.g. preset 19) first
press 1 and then 9 within the next
2 seconds.
b) You can select a radio station from the
radio station list provided for each
waveband:
• Press BND/TS to select the wave-
band (FM, FMT, MW, LW).
• Press ME.
• Press
/ to select the desired ra-
dio station.
• Press OK on the operating panel or
ME on the remote control unit.
The radio station you have selected
will begin to play.
Alter search sensitivity
You can alter the automatic search sensi-
tivity.
If “lo” is displayed, the radio will only pick up
strong, local stations.
If “lo” is switched off, the radio will also pick
up weaker, more distant stations.
To switch the search sensitivity:
• Press
*
.
The sensitivity level can be selected sepa-
rately for each memory bank (refer to the
section on ”Programming with DSC – DX /
LO-LEVEL”).
Switch from stereo to mono
(FM only)
Every time the radio is switched on, stereo
playback will be activated automatically.
The unit will gradually switch to mono if the
reception quality deteriorates beyond a cer-
tain point.
Radio operation with RDS (Radio Data System)
Helsinki gb1 12.06.2002, 10:47 Uhr87