Blaupunkt Tokyo RDM 169 Car Stereo System User Manual


 
14
Remove the first KeyCard and insert
the new one while “CHANGE” still ap-
pears in the display.
After the display indicates “LEARN OK” or
“LEARN KC”,
press DSC.
Now you can also use the new KeyCard for
operating your unit.
A maximum of two cards can be used with
the set.
If you attempt “train” a third Card, the ac-
cess authorization for the KeyCard not used
for the “training” process will be deleted au-
tomatically.
Displaying the radio data
You can use the KeyCard supplied with your
set to display the radio pass data such as
the model name, product number (7 6 ...)
and serial number.
Please refer to the section on “DSC pro-
gramming - READ KC”.
Short Additional Memory
(S.A.M.)
The second KeyCard can be programmend
by your dealer to read out short information,
which will run through the display, for ex-
ample, the phone number of your car deal-
er or the emergency call number of your
automobile association.
The selectable text with a maximum of 162
characters can be programmed by any deal-
er who has the required programming equip-
ment available.
Optical display as theft protec-
tion
Flashing light diode ?
When the vehicle is stationary and the Key-
Card has been removed, the light diode can
be switched to flash for extra anti-theft se-
curity.
For this it is necessary that the positive pow-
er supply line and the permanent +12 V lead
are connected such as described in the in-
stallation instructions.
Make sure that the unit is switched off; the
operating panel is unlocked; the KeyCard
has been removed; “LED ON” has been
selected in the DSC mode (factory setting).
If necessary, please refer to the section on
“DSC programming - LED”.
Switching off the flashing light diode
The flashing light can be switched off by
selecting “LED OFF” in the DSC menu.
Care of your KeyCard
To ensure that the KeyCard will function
properly it is important that the contacts are
free from any foreign particles. Avoid direct
skin contact.
If necessary, clean the KeyCard contacts
using a cotton swab soaked in rubbing al-
cohol.
Lost or damaged KeyCard
If the KeyCard for your unit is lost or dam-
aged you can train a new KeyCard.
You can purchase the new KeyCard from
any authorized dealer. You will also require
the master code for the unit, which you will
get from your authorized dealer.
KeyCard theft protection system