Filter
Top Products
17
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
If necessary, deactivate these functions in
menu level 2.
Manual tuning:
• Press << >>; the frequency will change
in short intervals downwards or up-
wards.
If you hold the right or left part of the rocker
switch pressed down, the frequency scan
will accelerate.
Scrolling through the broadcast-
ing networks (FM only)
You can use the << >> buttons to tune into
stations in your reception area.
Important:
a) You must have tuned into the station
at least once before. To do this, you
can press TS to start Travelstore in
menu level 2.
b) AF is switched on and PTY is switched
off. If necessary, switch these func-
tions on or off in menu level 2.
Scrolling
If it is possible to receive several programs
in the same broadcasting network, you can
scroll through them forwards by pressing >>,
or backwards by pressing <<, e.g. NDR 1,
2, 3, 4, ... .
Changing the memory bank
You can shift between the FM memory
banks I, II and T and the AM memory banks
M and MT in order to store stations and re-
call them later. The currently selected mem-
ory bank is indicated in the display.
• Press NEXT as often as necessary un-
til the desired memory bank lights up
in the display.
Storing stations
On FM, you can store six stations on the
preset buttons ST1 - ST6 for each of the
memory banks I, II and T.
On AM/AMT, you can also store six stations
each.
• Press TU, menu level 2 will appear in
the display.
• Press BND to select the band.
• Use the rocker switch to tune into a
station (either automatically
/ or
manually << >>).
Station tuning
Automatic tuning /
• Press / ; the car radio will automati-
cally search for the next station.
If you hold / on the rocker switch pressed
up or down, seek tuning will speed up in up-
wards or downwards direction.
Seek tuning
Up
Down
<< Down in short intervals
(for FM only: “AF” must be switched off)
>> Up in short intervals
(for FM only: “AF” must be switched off)
Manual tuning with << >>
You can also tune into a station manually.
In this case:
AF and PTY must be switched off (i.e. the
symbols do not light up in the display).
Radio operation with RDS (Radio Data System)