Filter
Top Products
5
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
3 Adjusting the volume
Turn the knob to adjust the volume as
desired.
The volume level selected will appear
in the display. When the unit is
switched on, it will automatically play
at the pre-set volume (ON VOL).
It is possible to adjust the ON VOL (re-
fer to “DSC programming - ON VOL”).
4 Softkeys / Display
Softkey = key with different functions
The functions which appear in the dis-
play can be selected.
Radio operation
While listening to the radio you can
press TU to switch between menu lev-
el 1 and menu level 2.
The unit will return to menu level 1 au-
tomatically 8 seconds after the last key
is pressed.
Menu level 1
Station keys and memory levels
NEXT - FM
Switches between the memory levels
for FM I, FM II, FM T.
NEXT - AM
Switches between the AM and AMT
memory banks.
ST1 - ST6
On this memory level it is possible to
store radio stations on the FM levels I, II
and “T” on the keys marked ST1 to ST6.
6 stations each can be stored for the
AM banks AM and AMT.
Storing a radio station - Press one of
the station keys from ST1 to ST6 until
it is possible to hear the program again
(beep).
Recalling a radio station - Select the
desired band. Press NEXT to select
the memory level required and press
the corresponding station key briefly.
Menu level 2
Adjusting the radio functions
NEXT - FM
Switches between the memory levels
for FM I, FM II, FM T.
NEXT - AM
Switches between the AM banks AM
and AMT.
BND
Selects the band and memory level
(FM I, FM II, FM T, AM, AMT).
SCA - Scan
a) PTY is switched off
(lettering is lit normally, not highlighted
in the display)
Press SCA briefly (Radio Scan) -
“SCAN” will flash in the display alter-
nately with the abbreviation for the sta-
tion being scanned. All of the radio
stations within reception range will be
scanned.
Quick Reference