Filter
Top Products
30
This function has been set
to “SHARX ON” at the facto-
ry.
HICUT Interference-related cut in
the treble sound. Cuts the
treble when interference oc-
curs. Can be adjusted from
NO HICUT (OFF) to HICUT
3 (highest setting). Which
setting is the most pleasant
is a matter of personal pref-
erence.
LO/DX To adjust the seek tuning
sensitivity.
“LO” stands for local recep-
tion.
“DX” stands for distant re-
ception.
Select “LO 3” if you want to
receive strong stations in
the local area, select “DX 1”
if you want to tune into
weaker stations which are
further away.
DSC programming
The car stereo has been equipped with DSC
(Direct Software Control) to allow you to
customize certain programmable, basic set-
tings to suit your personal needs and pref-
erences and then store them.
The basic settings for this audio equipment
were made at the factory.
In the following you can find an overview of
these settings, so that you can always reset
to them if desired.
If you wish to alter any of the programming,
• press DSC.
Use the rocker switch and the ENT button
to select and adjust the functions de-scribed
in the following. The display will show you
the setting you have selected.
/ Select function
<< / >> Adjust/recall value
LOW EQ Equalizer setting:
To activate the frequencies
and set the level for the low-
er frequency range.
Refer to the detailed instruc-
tions in the section on
“Equalizer setting”.
HIGH EQ Equalizer setting:
To activate the frequencies
and set the level for the up-
per frequency range.
Refer to the detailed instruc-
tions in the section on
“Equalizer setting”.
CD NAME Only available during CD
playback.
Use this function to name
your CDs. (See “Entering
CD names”)
SHARX Switches the bandwidth in
the FM frequency range.
When there are a large
number of stations within
your current reception
range, use << >> to switch
to SHARX ON which will
prevent most interference
from adjacent radio stations.