Filter
Top Products
21
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
If the radio is unable to find a station offer-
ing the selected program type, the display
will show “NO PTY” and a beep tone will be
emitted. The radio will select the station
which was tuned into before seek tuning was
activated.
You can assign different program types to
each preset position. Please refer to the next
section on “Storing program types”.
b) Using the << >> buttons on the rocker
switch
When PTY is switched on, you can se-
lect a program type using buttons
<< >>.
• Press << or >>; the program type se-
lected last will be displayed for 3
seconds.
• During this period press >> (for-
wards) or << (backwards) to select
the desired type.
• Press << or >> as many times as re-
quired.
If you would like to listen to a station
with the selected PTY,
• press
/ to start the seek tuning
function.
If the radio is unable to find a station offer-
ing the selected program type, the display
will show “NO PTY” and a beep tone will be
emitted. The radio will select the station
which was tuned into before seek tuning was
activated.
Storing program types
Each of the preset buttons ST1 - ST6 has
been assigned one program type at the fac-
tory.
If desired, you can also replace these with
other available program types.
To do so, make sure that “PTY” lights up in
the display.
• If necessary, press the PTY button to
switch on the function.
• Select a program type using buttons
<< >> and
• hold down the desired preset button
(ST1-ST6) until you hear a beep.
Now the selected program type can be re-
called by pressing this preset when PTY has
been activated. (“PTY” appears in the dis-
play.)
Radio operation with RDS (Radio Data System)
Scanning stations with PTY SCAN
Requirement: “PTY” must appear in the dis-
play.
• Press the SCA button.
All of the stations in your current reception
area offering the selected program type will
be scanned.
To switch off PTY-SCAN:
• Press SCA or the seek-tuning rocker
switch once again.
After the entire band has been scanned, the
PTY-SCAN function will be turned off auto-
matically.