Filter
Top Products
24
Selecting the display mode
You can select the desired display mode for
CD and CD changer operation:
• Press DIS as often as necessary until
you have selected the desired display
mode.
“CD 10” – The CD number (for
changer operation only).
“TRACK 13” – Track number
“14:34” – Clock
“00:20” – The elapsed playback time
“VIVALDI” – CD name
The CD name will not be displayed unless it
has already been entered.
Please refer to the section on “Entering CD
names”.
Repeating tracks/CDs
You can repeat a track or a CD (in changer
operation) as often as desired. Use the RPT
key to select the following functions:
- REP TRCK = Repeat track
- REP CD = Repeat CD (changer opera-
tion only)
- RPT OFF = Repeat function off
• Press RPT as many times as neces-
sary until you have selected the de-
sired setting.
The CD or the track will repeat until you
press RPT to switch off the function with
“RPT OFF”.
TPM
(Track Program Memory)
Use this feature to program and play your
favorite CD tracks in CD and changer oper-
ation. Up to 30 CDs can be managed in the
CD mode, up to 99 discs in the CDC mode,
with a maximum of 40 tracks each. TPM can
only be used in the mode it was stored in
(CD or changer operation).
Selecting CDs and titles
You can use the rocker switch to conven-
iently select CDs, tracks or passages. You
cannot select CDs unless a CD changer has
been connected.
<< / >> CD selection (changer operation only)
>> Up: Press briefly
<< Down: Press briefly
/ Track selection
Upwards: Press briefly.
CUE - fast advance (audible): Hold
pressed down.
Downwards: Press twice or as many
times as required.
To re-start a title: Press briefly.
REVIEW - fast reverse (audible):
Hold pressed down.
The rocker switch acts as a sequence switch
so that you can skip over several CDs or
tracks if you press it repeatedly.
CD operation / CD changer operation