Filter
Top Products
43
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
“HICUT 0” means the function is inac-
tive, while “HICUT 3” indicates the
strongest automatic reduction of the tre-
ble and the interference.
➮ Press the MENU button 8 or OK
;.
Bandwidth selection in the
presence of interference (SHARX)
The SHARX function allows you to elim-
inate interference from neighbouring
stations as far as possible (FM only).
Switch on the SHARX function when
stations are crowded.
Switching SHARX On / Off
➮ Press the MENU button 8.
➮ Press the or button : until
“SHARX” appears in the display.
➮ Press the or button : to
switch SHARX on or off.
“SHARX OFF” means that the function
is not active, while “SHARX ON” means
that the automatic bandwidth selection
is operating.
➮ Press the MENU button 8 or OK
;.
Select Display of Running Texts
Some radio stations use the RDS sig-
nal to transmit advertising or other in-
formation instead of the station name.
These “running texts” are shown in the
display. To switch off the display of “run-
ning texts”:
➮ Hold the RDS button 4 pressed
until “NAME FIX” appears in the
display.
To reactivate the display of “running
texts”
➮ Hold the RDS button 4 pressed
until “NAME VAR” appears in the
display.
Adjusting the Display
Under radio operation it is possible to
choose between continuous display of
the time or continuous display of the sta-
tion name (or frequency).
➮ Hold the / DIS button 7
pressed until the display you want
appears.
RADIO OPERATION