Filter
Top Products
38
If a traffic announcement is received
during a telephone call, or while the
navigation system is speaking, the traf-
fic announcement is not reproduced
until the call or the speech output has
finished.
If a call is received or if the navigation
system begins speaking during a traffic
announcement, the announcement is
reproduced. The telephone call or
speech output can be heard when the
traffic announcement has finished.
The volume at which navigation output
or telephone calls start is adjusted as
follows:
➮ Press the MENU button 8.
➮ Press the or button : until
“TEL/NAVI VOL” appears in the dis-
play.
➮ Set the desired volume with the
buttons :.
➮ Press the MENU button 8 or OK
;.
Note:
● You can adjust the volume level of
telephone calls and of speech out-
put as they are made with the vol-
ume control 2.
Adjusting the Volume of the
Confirmation Tone
With certain functions, if you hold a but-
ton pressed for longer than two seconds,
e.g. when saving a station frequency on
a station button, a confirmation tone (or
beep) is heard. To adjust the volume lev-
el of the beep
➮ Press the MENU button 8.
➮ Press the or button : until
“BEEP” appears in the display.
➮ Adjust the desired volume with the
buttons :.
“0” means no beep, “9” means maximum
beep volume.
➮ Press the MENU button 8 or OK
;.
VOLUME ADJUSTMENT