Classe Audio SSP-800 Car Speaker User Manual


 
15
HDMI OUT
HDMI IN
COMPONENT IN
YPbPr
YPbPrYPbPr
S-VID1 S-VID2 1 2
1234 12
1 2 COMPONENT OUT
VIDEO IN
CAN IN
USB
7.1 AUDIO IN ANALOG AUDIO IN
R1 L1
L2
R2
L3
R3
RL
RR
CEN
SUB
SL
SR
FL
FR
OPT1 OPT2 OPT3 OPT4
COAX1 COAX3
COAX4COAX2
IN
OUT
RS-232
TRIGGERIR
DIGITAL INPUT
CONTROL
DIGITAL
OUTPUT
COAX
OPT
OUT2OUT1
CAN OUT
A1
A2
AUX 2 AUX 1
R
L
FRONT R
FRONT L
ANALOG AUDIO OUT
CENTER
S
C
SUB
SURR R
SURR L
SL
SR
REAR R
RL
RR
REAR L
CAUTION! TO REDUCE THE RISK OF ELECTRIC SHOCK, GROUNDING
OF THE CENTER PIN OF THIS PLUG MUST BE MAINTAINED
AVIS! POUR RÉDUIRE LE RISQUE DE CHOC ÉLECTRIQUE
LA FICHE CENTRALE DE LA PRISE DOIT ÊTRE
BRANCHÉE POUR MAINTENIR LA MISE À LA TERRE
100-120V~
T800mAL250V
220-240V~
T500mAE250V
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
1
23
4
5
6
7
8
9
Fabriqué au
Made in
CANADA
MOD SER
V W
SSP-800 XXXXXXX
70120
Hz
~
50/60
10
16
17 18 19
20 22
12 13
11
14
15
21
Rear Panel
e rear panel of the SSP-800 is shown above.  e numbers in the drawing refer
to the descriptions in this section.
serial number You’ll fi nd your processor’s serial number on the top right edge of the rear panel,
as shown in the graphic above (the black label). Please record this number on the
Introduction Page (page 6) of this manual for future reference.
And since you have found the serial number, please use it to register your
purchase, if you haven’t done so yet. As we’ve said, your registration is our way
of keeping in touch with you. We will use the information to advise you of any
updates or other items of interest. Registration is simple, so please register online
at www.classeaudio.com or fi ll out the registration card and drop it in the mail.
1 S-Video Inputs
e SSP-800 supports two S-Video inputs, labeled S-VID1 and S-VID2.
Use these inputs when the output of your source component is S-Video.
S-Video (also called Super-Video or Y/C video) is an analog video format
in which the black and white (luminance or Y) and color (chrominance or
C) portions of the video signal are transmitted separately and recombined
by the receiving device. S-Video transmission produces less color bleeding
and better edge defi nition than a standard composite video connection.