Filter
Top Products
63
Care & Maintenance
To remove dust from the cabinet of your Surround Sound Processor, use a
feather duster or a lint-free soft cloth. To remove dirt and fi ngerprints, we
recommend isopropyl alcohol and a soft cloth.
Dampen the cloth with alcohol fi rst and then lightly clean the surface of the
Surround Sound Processor with the cloth. Do not use excessive amounts of
alcohol that might drip off the cloth and into the Surround Sound Processor.
Caution! Power down and remove the AC power cord from the
SSP-800 before performing maintenance. At no time should
liquid cleaners be applied directly to the Surround Sound
Processor, as direct application of liquids may result in
damage to electronic components within the unit.
input factory defaults For your convenience, here are the factory default settings for the SSP-800
Surround Sound Processor.
Input # Default Audio Connector Default Video Connector
1 Coaxial Digital 1
None
2 Coaxial Digital 2
None
3 Coaxial Digital 3
None
4 Coaxial Digital 4
None
5
Optical Digital 1
None
6 Optical Digital 2
None
7 Optical Digital 3
None
8 Optical Digital 4
None
9 XLR Analog 1
None
10 RCA Analog 2
None
11 RCA Analog 3
None
12 Coaxial Digital 1
None
13 Coaxial Digital 2
None
14 Coaxial Digital 3
None
15 Optical Digital 1
None
16 Optical Digital 2
None
17 Optical Digital 3
None
18 XLR Analog 1
None
19 RCA Analog 2
None
20 RCA Analog 3
None