Filter
Top Products
20
20
About This Receiver
Operation
■ Using the Audio Cover
After detaching the PND, we recommend you
to use the optional Audio Cover for this
receiver.
■ Fitting the Audio Cover
● Engage the catch at the left end of the
Audio Cover with the lock on the main unit.
● Press the right-hand side of Audio Cover
so that it fits and clicks.
■ How to Detach the Audio Cover
from the Main Unit
● This removes the right edge of the audio
cover from the main unit.
● Hold the audio cover on the right side, lift it
up and pull it toward you to remove it.
The PND is equipped with a built-in hands-
free microphone and a light sensor. For
details on how to use the hands-free call
function or configure light sensor settings,
refer to the operation manual of the PND.
IMPORTANT
Using the Audio Cover
1
Mount the left end of audio cover on
this receiver.
2
Mount the entire Audio Cover on this
receiver.
1
Press the [Release] button.
2
Remove the audio cover.
Hands-Free Microphone
and Light Sensor
● Pressing a sharp object against the hands-
free microphone or the light sensor may
damage them.
● If you are hard to hear the voice during
hands-free calling, adjust the front panel
tilting angle and try to direct the
microphone toward you.
Built-in hands-free microphone
Light sensor