Filter
Top Products
36
36
Using the Radio
Audio operations
■ Auto Station Memory (ASM)
IMPORTANT
● The automatic station selection will start
with a beep sound. A search will be
conducted from the lowest frequency
through progressively higher frequencies
and stations with strong reception will be
memorized for preset registration numbers
[1] to [6]. The registration procedure has
been completed, a beep sounds twice and
the station memorized last (i.e. the one
memorized for P6) will continue to be
received. Subsequently, when you listen to
the radio you will be able to select stations
by calling up preset numbers.
To stop ASM, touch .
This function enables reception of all the
stations in the preset switches to be played
for five seconds each.
● The stations of preset switches P1 to P6
will be scanned sequentially. Each station
is turned for five seconds.
To cancel the preset scan, touch
.
The frequency can be displayed on the LCD
when the PND is connected.
● You can select a station by simply touching
a preset switch (any of [1] to [6]). The
frequency of the selected station is
displayed.
● When you save a new station in memory,
the existing station is cleared instead.
● If you can tune less than six stations, the
remaining stations are kept in memory.
1
Touch .
2
Touch .
Preferences
ASM
Preset Scan
1
Touch .
2
Touch .
Showing the current
frequency on the sub-
display
1
Press the [TEXT] button.
Preferences
Preset SCAN
Stop SCAN