Filter
Top Products
35
35
■ Selecting a Preset Channel
● To the right:
Switches to the next larger preset channel.
To the left:
Switches to the next smaller preset
channel.
■ Touching a Preset Switch
● The registered preset channel will be
selected and the corresponding station will
be received.
● The receiver band is switched as follows
each time you press the [BAND] button.
FM1 J FM2 J FM3 J AM J FM1 J ...
You can save a radio station in memory in the
auto or manual mode.
■ Manual Saving
● The selected station will be saved, and the
preset channel number and frequency will
be shown on the display.
To manually set additional selected
stations for the remaining preset channels,
repeat this procedure for each channel.
Six stations can be memorized for each of
FM 1, 2 and 3, and six stations can be
memorized for AM, making a total of 24
stations.
If the stations have been stored in
memory, a station can be selected by
touching a preset switch and the station
can be received.
1
Hold down the [SELECT (Right)] or
[SELECT (Left)] button for 1 or more
seconds.
1
Touch a preset switch of memory.
Selecting a Radio Band
1
Press the [BAND] button.
Saving a Station in
Memory
1
Select a station you wish to save by
Manual tuning or Auto tuning.
2
Touch the preset switch of station you
wish to save until a beep sounds.