Filter
Top Products
42
42
How to use the XM satellite radio
Audio operations
IMPORTANT
● The selected station will be memorized.
To set additional manually selected
stations for the remaining preset channels,
repeat this procedure for each preset
channel.
Subsequently, when listening to the
satellite radio you will be able to tune into
stations by touching the preset switch.
● The channel preset to the selected touch
switch is tuned.
● “SCAN” will be displayed and the stations
memorized for preset channels P1 to P6
will be called up in order and received for
five seconds each. To cancel the preset
scan, touch .
When receiving an XM broadcast,
information about the current broadcast, such
as the channel number, channel, artist,
feature, song, and program title, can be
displayed with the PND disconnected.
● Information on the music being played will
be shown on the sub-display and switched
as follows.
channel No. J channel name J artist/
feature J song/program title J channel
No. J ...
3
Input a channel.
4
Touch .
Memorizing Channels
If the vehicle's battery is disconnected (for
repairs to the vehicle or for removing the
main unit), all channels in memory will be
lost. In such a case, set channels in memory
again.
1
Tune into the station to be memorized.
2
Touch the preset switch where you
want to memorize the station until you
hear a beep sound.
Select
Selecting a preset
channel
1
Touch one of the touch switches, [1] to
[6], that appear on the PND display.
Preset Scan
1
Touch .
2
Touch .
Displaying information
about the current
broadcast on the sub-
display
1
Press the [TEXT] button.
Preferences
Preset SCAN
Stop SCAN