Eclipse - Fujitsu Ten CD3100 Car Stereo System User Manual


 
How to use the remote control
33
VI
Replacing the battery
Use two AAA size batteries.
[ PRESET CH ] buttons
[ DISC ] buttons
Selects radio preset channels
and performs disc mode
functions.
[MODE] button
Switches radio band and DISC
mode.
[DISC] button
Switches audio source mode.
[AUX] button
Switches to AUX mode.
[ ] button
Increases the volume.
[ TUNE·SEEK ] buttons
[ TRACK ] buttons
Selects radio stations and CD
tracks.
WARNING
To prevent accidents, store batteries out of
the reach of children. If a child has
swallowed one, consult a doctor
immediately.
1
Remove the back cover of the
remote control unit by gently
pressing and sliding it in the
direction indicated by the arrow.
No. Button Name/Working
2
Install the two batteries provided
into the compartment as
illustrated inside the
compartment.
3
Return the back cover into place
by sliding it in the direction
indicated by the arrow.
CAUTION
Be extremely careful not to swallow the
battery.
The battery life is approximately one
year. If the remote control unit does not
operate correctly or if the remote control
does not light button lamp, replace the
batteries.
Be sure to orient the batteries correctly
so that the positive and negative poles
match the diagram.
Do not use one new battery and one old
one; use two new batteries.
• Use only two of the same kind of
battery.
If any liquid is seen leaking from the
batteries, remove both batteries and
dispose of them properly. Thoroughly
clean the battery compartment with a dry
cloth. Then install new batteries.