Filter
Top Products
Making changes with Function Mode
45
XI
Making changes with Function Mode
A variety of settings can be changed.
Switching the Function Mode
The Menu Selection mode is activated.
The funciton adjustment mode is
activated.
The function mode is activated.
When the button is pressed, the
setting item changes in the following
order.
AREA SHOT
*1
↔ GUIDETONE ↔
CLOCK ADJUST ↔ DEMO ↔ HD
RADIO
*2
↔ AUX
*3
↔ AUX SENSE ↔
STEERING SW ↔ SIRIUS ID
*4
↔ XM
ID
*5
*1: Refer to page 36 for details on
Area shot operation.
*2: This setting can only be chosen
when an optional HD Radio tuner
unit is connected. (Refer to page
50 for details on HD Radio
operation.)
*3: Refer to page 61 for detail on AUX
operation.
*4: This setting can only be chosen
when an optional SIRIUS Satellite
radio tuner unit is connected.
(Refer to page 56 for details on
SIRIUS Satellite radio operation.)
*5: This setting can only be chosen
when an optional XM Satellite
radio tuner unit is connected.
(Refer to page 51 for details on XM
Satellite radio operation.)
Setting guide tone
(GUIDE TONE)
The main unit is set at the factory to emit a beep
tone in response to button operation. The guide
tone feature may be disabled in the following
procedure:
The guide tone setting mode is
activated.
Setting time (CLOCK ADJUST)
This main unit uses the 12-hour display notation.
The clock setting mode is activated.
Right: Minutes will be switched.
Left: Hours will be switched.
1
Press the [EQ/MENU] button for
more than one second.
2
Press the [SELECT] (Upper/Lower)
button to select the FUNCTION.
3
Press the [ENTER] button.
4
Press the [SELECT] (Upper/Lower)
button to select the setting item.
1
Press the [SELECT] (Upper/Lower)
button to select the GUIDE TONE.
2
Press the [ENTER] button.
3
Press the [SELECT] (Upper/Lower)
button to select the guide tone ON/
OFF.
4
Press the [EQ/MENU] or [RTN]
button to exit function mode.
1
Press the [SELECT] (Upper/Lower)
button to select the CLOCK ADJUST.
2
Press the [ENTER] button.
3
Press the [SELECT] (Right/Left)
button to display the item to be
selected for adjustment.
4
Press the [SELECT] (Upper/Lower)
button to adjust the time.
X