Eclipse - Fujitsu Ten CD3100 Car Stereo System User Manual


 
Making changes with Function Mode
47
XI
The CD-R data is read. While it is
reading, [READING] is displayed.
If the data can be read successfully,
[Completed] will appear on the display.
When using CD-R data, the CD-R will
automatically eject when reading is
complete.
ATTENTION
This function is available only for vehicles
equipped with steering remote with an
interface that operates by detecting voltage.
Compatibility with various switches
The compatibility of the main unit's various modes and the steering remotes installed on your
vehicle are as follows:
*1
: Switch names change depending on vehicle make and model.
*2
: If a SIRIUS/XM satellite radio tuner (purchased separately) is connected, categories can be switched when in the
satellite mode.
4
Press the [ (OPEN/EJECT)]
button to close the front panel.
5
Press the [SELECT] (Upper/Lower)
button to select files.
6
Press the [ENTER] button.
CAUTION
Do not turn the ignition switch or power
to the main unit ON or OFF (or remove
the front panel of the main unit) while
data reading is in progress. Data
reading will be interrupted and data may
be damaged.
Only the [VOL] button can be operated
while the system is reading data.
Switch Name
*1
Button
operation
Mode
Tuner Disc mode AUX iPod Power OFF
TRACK+
Short tap TUNE UP TRACK UP TRACK UP
Hold
SEEK UP
*2
FAST UP FAST UP
TRACK-
Short tap
TUNE
DOWN
TRACK
DOWN
TRACK
DOWN
Hold
SEEK
DOWN
*2
FAST
DOWN
FAST
DOWN
VOL+
Short tap Volume UP Volume UP Volume UP Volume UP
Hold
Gradually
increases
volume
Gradually
increases
volume
Gradually
increases
volume
Gradually
increases
volume
VOL-
Short tap
Volume
DOWN
Volume
DOWN
Volume
DOWN
Volume
DOWN
Hold
Gradually
decreases
volume
Gradually
decreases
volume
Gradually
decreases
volume
Gradually
decreases
volume
MODE
Short tap Change to
the next
mode
Change to
the next
mode
Change to
the next
mode
Change to
the next
mode
Power ON in
the last
mode
Hold
MUTE
Short tap
MUTE MUTE MUTE MUTE
Hold
POWER
Short tap
Power OFF Power OFF Power OFF Power OFF
Power ON in
the last
mode
Hold