Filter
Top Products
3
3
.
.
1
1
2
2
S
S
y
y
s
s
t
t
e
e
m
m
S
S
e
e
t
t
u
u
p
p
M
M
e
e
n
n
u
u
Diagram 3.24
Diagram 3.24 is a screen shot of the SYSTEM SETUP MENU. This menu is for setting up any
additional options and restoring defaults to the digital recorder. In the SYSTEM SETUP MENU the
following fields are defined as follows:
1. SYSTEM VERSION: Current system firmware version.
2. SYSTEM VIDEO FORMAT: NTSC or PAL. System can detect the input signal type
automatically from camera 1 while system is booting up. Users do not need to set it up.
Note: Camera 1 input must be connected in order to auto-detect video format.
3. LOAD/SAVE CONFIGURATION:
YES: Turn the jog to enter the selection window, there are 4 options available: CANCEL,
DEFAULT, LOAD, and SAVE. Select “CANCEL” to exit the window. Select “DEFAULT” to
load factory default values. Select “LOAD” to upload DVR configuration settings from USB.
Select “SAVE” to save existing DVR configuration settings to USB device. Press “SELECT”
button from the front panel to confirm once the selection is made. Note that a USB device has to
be inserted properly before choosing “LOAD” or “SAVE” options. System will ask you to stop
recording before you can load defaults, load saved settings, or save existing settings.
NO: Press “ENTER” to move past “LOAD/SAVE CONFIGURATION”.