Filter
Top Products
30
Your hi-fi system has two timer modes:
– The switch-on timer, which switches the hi-fi system on at the set
time and wakes you with the input source you selected.
– The sleep timer, which switches the hi-fi system off at a preset time.
Switch-on timer
Setting the switch-on timer
The time must be set on the hi-fi system. Timer settings can only be
performed in standby mode.
When this setting is being made, if no button is pushed for more than
10 seconds, the hi-fi system will end the process automatically. You
then have to start again.
1 Press and hold down »TAPE
≈
« on the hi-fi system or »
≈
« on the
remote control.
– Display: »
T 00:00«, the hours of the switch-on time flash.
2 Enter the hours with »–
ß
+
« on the hi-fi system or »+« and
»
–« on the remote control and confirm with »TAPE
≈
« on the hi-
fi system or »
≈
« on the remote control.
– Display: for example, »
T 06:00«, the minutes of the switch-on
time flash.
3 Enter the minutes with »–
ß
+
« on the hi-fi system or »+« and
»
–« on the remote control and confirm with »TAPE
≈
« on the hi-
fi system or »
≈
« on the remote control.
– Display: »
T OFF« flashes.
4 Press »–
ß
+
« on the hi-fi system or »+« and »–« on the
remote control to select from timer on, tuner, CD or timer off
(»
TON«/»RADIO«/»CD«/»T OFF«) and confirm with »TAPE
≈
« on
the hi-fi system or »
≈
« on the remote control.
– Display: for »
T ON« for example »RADIOZ«.
Note:
If you select the CD alarm input source, make sure you have in-
serted the appropriate medium.
Resetting the switch-on timer
1 To alter the current timer setting, press and hold down »TAPE
≈
«
on the hi-fi system or »
≈
« on the remote control until »T 00:00«
appears in the display and the hours of the switch-on time flash.
TIMER MODE
----------------------------------------------------------------------------------------
T 00:00
T 06:00
T OFF
T ON
RADIO Z
2_UMS_4700_en.qxd 23.10.2007 9:28 Uhr Seite 30