Filter
Top Products
4 INTRODUCTIONS
Preparation
Cancel the display demonstration and set the clock
• See also pages 23 and 24.
1
Turn on the power.
2
Enter the PSM settings.
3
Cancel the display demonstrations
Select “Demo,” then “Off.”
Set the clock
Select “Clock Hr” (hour), then adjust the hour.
Select “Clock Min” (minute), then adjust the minute.
Select “24H/12H,” then “24Hours” or “12Hours.”
4
Finish the procedure.
Changing the display information and pattern
When the power is turned off: Check the current clock time
Ex.: When tuner is selected as the source
Detaching the control panel
Audio level meter display
(see “LevelMeter” on page 23)
Attaching the control panel
Avoid touching the connectors.
Source operation display
• If a station has been assigned a title, station
title appears after about 5 seconds.
• To assign a title to a station, see page 28.
EN02-07_KD-G844[UI]f.indd 4EN02-07_KD-G844[UI]f.indd 4 12/14/07 11:52:22 AM12/14/07 11:52:22 AM