JVC KD-APD89 Car Stereo System User Manual


 
ENGLISH
13OPERATIONS
Listening to the USB device
You can connect a USB mass storage class device such as a USB memory, Digital Audio Player *, portable HDD, etc. to
the unit.
You can also connect an Apple iPod to the USB input jack. For details of the operations, see pages 20 and 21.
This unit can play MP3/WMA/WMA-DRM10 */WAV tracks stored in a USB device.
* You can connect both MTP (Media Transfer Protocol) devices and USB mass storage class devices. See also page 33.
All tracks will be played repeatedly until you change the source or detach the USB device.
12
USB memory
If a USB device has been attached...
Playback starts from where it has
been stopped previously.
If a different USB device is
currently attached, playback starts
from the beginning.
To stop play and detach the USB device
Straightly pull it out from the unit.
Press SOURCE to listen to another playback source.
You can operate the USB device in the same way you
operate the files on a disc. (See pages 11 and 12.)
You can listen to WAV files by following the MP3/
WMA files operations listed on pages 11 and 12.
Cautions:
Avoid using the USB device if it might hinder your
safety driving.
Do not pull out and attach the USB device repeatedly
while “Reading” is shown on the display.
Do not start the car engine if a USB device is
connected.
This unit may not be able to play the files depending
on the type of USB device.
Operation and power supply may not work as
intended for some USB devices.
You cannot connect a computer to the USB input
terminal of the unit.
Make sure all important data has been backed up to
avoid losing the data.
Do not leave a USB device in the car, expose to direct
sunlight, or high temperature to avoid deformation
or cause damages to the device.
Some USB devices may not work immediately after
you turn on the power.
For more details about USB operations, see page 33.
USB input jack
EN08-15_KD-847[EE]_2.indd 13EN08-15_KD-847[EE]_2.indd 13 12/31/07 9:13:26 AM12/31/07 9:13:26 AM