JVC KD-APD89 Car Stereo System User Manual


 
ENGLISH
39REFERENCE
Troubleshooting
What appears to be trouble is not always serious. Check the following points before calling a service center.
Symptoms Remedies/Causes
General
Sound cannot be heard from the speakers. Adjust the volume to the optimum level.
Check the cords and connections.
The unit does not work at all. Reset the unit (see page 3).
“Connect Error” appears on the display. Remove the control panel, wipe the connector, then
attach it again (see page 4).
FM/AM
SSM automatic presetting does not work. Store stations manually.
Static noise while listening to the radio. Connect the antenna firmly.
Disc playback
Disc cannot be played back. Insert the disc correctly.
CD-R/CD-RW cannot be played back.
Tracks on the CD-R/CD-RW cannot be
skipped.
Insert a finalized CD-R/CD-RW.
Finalize the CD-R/CD-RW with the component which
you used for recording.
Disc can neither be played back nor ejected. Unlock the disc (see page 10).
Eject the disc forcibly (see page 3).
Disc sound is sometimes interrupted. Stop playback while driving on rough roads.
Change the disc.
Check the cords and connections.
Disc cannot be recognized (“No Disc,”
“CD Loading Error,” or “Eject Error” flashes).
Eject the disc forcibly (see page 3).
“Please Eject“ appears on the display. This occurs sometimes due to over-heating. Eject the disc
or change to another playback source.
Continued on the next page
EN32-41_KD-APD89[J]3.indd 39EN32-41_KD-APD89[J]3.indd 39 11/29/07 11:38:55 AM11/29/07 11:38:55 AM