JVC KD-APD89 Car Stereo System User Manual


 
ENGLISH
32
Setting menu ( : Initial)
Auto Connect
When the unit is turned on, the connection is
established automatically with...
Off: No Bluetooth device.
Last: The last connected Bluetooth device.
Order: The available registered Bluetooth device
found at first.
Auto Answer
Only for the device being connected for “BT-PHONE.”
On: The unit answers the incoming calls
automatically.
Off: The unit does not answer the calls
automatically. Answer the calls manually.
Reject: The unit rejects all incoming calls.
Message Info
Only for the device being connected for “BT-PHONE.”
Auto: The unit informs you of the arrival of
a message by ringing and displaying
“Received Message.”
Manual: The unit does not inform you of the arrival of
a message.
MIC setting (microphone setting)
Only for the device being connected for “BT-PHONE.”
Adjust the built-in microphone volume,
[LEVEL 01/02/03].
Version
The Bluetooth software and hardware versions are
shown.
You can change the settings listed on the right column
according to your preference.
When
is shown on the display, you can
move back to the previous screen by pressing number
button 3.
1 Select “BT-PHONE” or “BT-AUDIO.”
2 Enter the Bluetooth menu.
3 Select “Setting.”
4 Select a setting item.
*
1
Displayed only when a Bluetooth phone is
connected.
*
2
Displayed only when a Bluetooth phone is
connected and it is compatible with text
message.
*
3
Bluetooth Audio: Shows only “Version.”
5 Change the setting accordingly.
Bluetooth settings
EN32-41_KD-APD89[J]3.indd 32EN32-41_KD-APD89[J]3.indd 32 12/1/07 9:56:53 AM12/1/07 9:56:53 AM