Filter
Top Products
1-10 (No.MA165)
3.1.3 Removing the top chassis assembly
(See Figs.3 to 6)
• Remove the panel assembly and side heat sink.
(1) From the top side of the main body, remove the two screws
C attaching the top chassis assembly. (See Fig.3.)
(2) From the back side of the main body, remove the two
screws C attaching the top chassis assembly. (See Fig.4.)
(3) From the both sides of the main body, remove the two
screws C and screw D attaching the top chassis assembly.
(See Figs.5 and 6.)
(4) Lift the top chassis assembly in the direction of the arrow
and disconnect the connector CN966
on the main sub
board from the connector CN961
on the main board. (See
Fig.6.)
(5) Take out the top chassis assembly from the main body.
Fig.3
Fig.4
Fig.5
Fig.6
Top chassis assembly
C
C
Top chassis assembly
C
Top chassis assembly
C D
Top chassis assembly
C
Main sub board
CN966
CN961
Main board