Filter
Top Products
(No.MA165)1-29
4.6 Service mode
4.6.1 Standard input/output conditions
4.6.2 Service mode setting procedure
(The DVD does not need to be loaded before starting the following procedure.)
4.6.3 Operation procedures
Power supply voltage DC14.4V(11 to 16V)
Load impedance 4Ω(2 Speakers connection)
Line Output 20KΩ
[STANDBY/ON ATTENUATOR] button
[EJECT] button
[UP] button
[DOWN] button
[OK] button
[BACK] button
[MENU] button
[VOLUME+/VOLUME-] button
[F.SKIP] button[B.SKIP] button
[DISPLAY] button
Keep this state more than 2 seconds
while continuing pressing the
[STANDBY/ON ATTENUATOR] button
and [EJECT] button sequentially.
SERVICE MODE
NO EJECT
EMERGENCY EJECT
1
2
Exchanging it operate a menu of a service mode with the [UP] button
and [DOWN] button. Operate choice of a menu with a [OK] button.
1 : When an [OK] button is pushed in NO EJECT indication, it is set
by an EJECT prohibition mode.
When an [OK] button is pushed in EJECT OK indication, it is set
by a normal mode.
2 : Forced EJECT movement
A screen becomes normal indication after an OK button was pushed.
1. Service mode 1 (Indication is displayed in SERVICE MODE.)
Screen indication