Filter
Top Products
(No.MA165)1-33
4.6.4 DVD check mode
Keep this state more than 2 seconds
while continuing pressing the
[DISP] button, [BACK] button and
[EJECT] button sequentially.
SERVICE MODE4
RDS S MODE
MONITOR S MODE
4. Service mode 4
Screen indication
Exchanging it operate a menu of a service mode with the [UP] button
and [DOWN] button. Operate choice of a menu with a [OK] button.
RDS S MODE
VER=V
SPI=
PI =
TP =
MS =
RDS service mode
Only RDS model
PTY=
SM =
SQ =
TA =
PI =
MONITOR S MODE
R/W CHROMA 1
R/W CHROMA 2
DATA CLEAR
See "Monitor adjustment" for details.
CHROMA DATA read/write of NTSC/PAL signal processing IC
CHROMA DATA read/write of TFT driver IC
Clear of CHROMA DATA of 1,2 (return to an initial value)
NORMAL PLAY
EF OUT-TRACKING OFF
EF IN-TRACKING OFF
CD-LASER ON
DVD-LASER ON
DVDx1 JITTER MODE
EEPROM DATA DISP
EEPROM DATA CLEAR
TEMPERATURE
SEARCH & JITTER
MONITOR
PLAY
STOP
OPEN
CLOSE
Start at normal speed
(After start, jitter is measured by an inner position.)
Tracking off the outermost position of CD
Tracking off the innermost position of CD
CD_LD lights and laser current is displayed.
DVD_LD lights and laser current is displayed.
DVD x1 jitter measuring mode
(for use in mechanism adjustment)
Contents of EEPROM is displayed.
Contents of EEPROM is initialized.
Temperature indication
The search and jitter measurement to an appointed
position of DVD.
Monitor terminal setting
DVDx1 speed start
(After start, jitter is measured by an inner position.)
Disc stopped, LD-OFF
OPEN
CLOSE
Laser current value, jitter value
For EF phase error
For EF phase error
Laser current value, jitter value
Laser current value, jitter value
Laser current value, jitter value
EEPROM address
EEPROM contents
EEPROM address
EEPROM contents
Temperature is displayed in hex
numbers.
Position measured with VT-501
Jitter value
Not displayed.
Not displayed.
Not displayed.
Not displayed.
Command
Mechanism unit operation Indication contents
DVD CHECK MODE
NORMAL PLAY
EF OUT-TRACKING OFF
EF IN-TRACKING OFF
CD-LASER ON
DVD-LASER ON
DVDx1 JITTER MODE
DVD CHECK MODE
EEPROM DATA DISP
EEPROM DATA CLEAR
TEMPERATURE
SEARCH & JITTER
MONITOR
PLAY
DVD CHECK MODE
STOP
OPEN
CLOSE
Exchanging it operate a menu of a service mode with the [UP] button
and [DOWN] button. Operate choice of a menu with a [OK] button.