Kenwood DDX9702S Car Video System User Manual


 
ENGLISH 77
Videos cannot be played.
Connect with USB Audio and Video cable
KCA-iP202 for 30-pin connector models or
KCA-HD100 and KCA-iP103 through a Lightning-
Digital AV adapter for Lightning connector
models. Other cables cannot be used.
No sound of videos comes out.
Connect with USB Audio and Video cable
KCA-iP202 for 30-pin connector models or KCA-
HD100 and KCA-iP103 through a Lightning-Digital
AV adapter for Lightning connector models. Other
cables cannot be used.
RApple CarPlay/Android Auto/APPs
Desired source (“Apple CarPlay”/“Android
Auto”/“APPs”) is not displayed on the <TOP
MENU> screen.
Check whether the connected device is
compatible with CarPlay or Android Auto.
When iPhone compatible with CarPlay is
connected, check the <CarPlay Connection>
setting. (Page63)
RAV-IN1/AV-IN2
No picture appears on the screen.
Turn on the video component if it is not on.
Connect the video component correctly.
RHD Radio reception
AME automatic presetting does not work.
Store stations manually. (Page34)
Static noise while listening to the radio.
Connect the antenna firmly.
Sound quality changes when receiving HD Radio
stations.
Fix the reception mode either to <Digital> or
<Analog>. (Page33)
No sound can be heard.
The HD Radio reception mode is not appropriate.
Select the appropriate mode from <Digital>,
<Analog> or <Auto>.
RiHeartRADIO/Pandora/AUPEO!/Spotify
The application does not work.
The application on your iPod touch/iPhone/
Android is not the latest version. Update the
application.
RBluetooth
Phone sound quality is poor.
Reduce the distance between the unit and the
Bluetooth mobile phone.
Move the car to a place where you can get a better
signal reception.
The sound is interrupted or skipped while using a
Bluetooth audio player.
Reduce the distance between the unit and the
Bluetooth audio player.
Disconnect the device connected for Bluetooth
phone.
Turn off, then turn on the unit.
(When the sound is not yet restored) connect the
player again.
The connected audio player cannot be
controlled.
Check whether the connected audio player
supports AVRCP (Audio Video Remote Control
Profile).
The Bluetooth device does not detect the unit.
Search from the Bluetooth device again.
The unit does not pair with the Bluetooth device.
For devices compatible with Bluetooth 2.1:
Register the device using a PIN code. (Page46)
For devices compatible with Bluetooth 2.0:
Enter the same PIN code for both the unit and
target device. If the PIN code of the device is not
indicated in its instructions, try “0000” or “1234.”
Turn off, then turn on the Bluetooth device.
Echo or noise occurs.
Adjust the microphone unit position.
Adjust the echo volume or noise reduction
volume. (Page48)
The unit does not respond when you try to copy
the phone book to the unit.
You may have tried to copy the same entries (as
stored) to the unit.
Specifications
RMonitor section
Picture Size (W x H)
6.95 inches (diagonal) wide
156.6 mm × 81.6 mm (6-3/16" ×
3-3/16")
Display System Transparent TN LCD panel
Drive System TFT active matrix system
Number of Pixels 1 152 000 (800H × 480V × RGB)
Effective Pixels 99.99%
Pixel Arrangement
RGB striped arrangement
Back Lighting LED
REFERENCESREFERENCES