Kenwood KDC-BT558U Car Satellite Radio System User Manual


 
23
ENGLISH |
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Part list for installation
(A)
Faceplate
Wiring connection
Fuse (10A)
Rear/ front/ subwoofer output
Antenna terminal
Car fuse box
Car fuse box
Battery
Ignition switch
Blue/White
(Power control wire)
Light blue/yellow
(Steering remote
control wire)
Red
(Ignition wire)
Yellow
(Battery wire)
Black (Ground wire)
To the metallic body or chassis
of the car
To the power control terminal when using
the optional power amplifier, or to the
antenna control terminal in the vehicle.
Brown
(Mute control wire)
Blue
(Antenna control
wire)
White
Gray
Green
Purple
White/Black
Gray/Black
Green/Black
Purple/Black
To connect the Kenwood navigation system,
refer your navigations manual.
To front speaker (left)
To rear speaker (left)
To front speaker (right)
To rear speaker (right)
(Not used)
If no connections are made, do not let the wire
come out from the tab.
For
KDC-X598
/
KDC-BT558U
:
To the steering wheel remote control
adapter
(C)
Mounting sleeve
(B)
Trim plate
(D)
Wiring harness
(E)
Extraction key
MIC (Microphone input terminal)
( 12)
To the optional SiriusXM Vehicle Tuner
(commercially available)
( 10)
Light blue/yellow
(Marine remote
control wire)
For
KMR-D558BT
:
To Kenwood Wired Marine Remote Control
unit (optional accessory)
For the latest information on marine
accessories please go to:
http://www.kenwoodusa.com/Car_
Entertainment/Marine/
JS_KWD_KDC_X598_KWK0_001C_EN.indd 23JS_KWD_KDC_X598_KWK0_001C_EN.indd 23 6/2/2014 10:13:20 AM6/2/2014 10:13:20 AM